Jeep JL/JLU/JT Loaded 6.5″ Dash Enclosure JT Left and Right (PRO-FR6NEO Included) 225 Watts Rms

DS18 JP6NEO.FR Plug and Play Dash Enclosure Upgrade with 6.5″ Neo Full-Range Loudspeaker for Jeep JL/JLU and JT Left and Right As the most popular manufacturer of professional grade Jeep Audio products, DS18’s expert engineering team is still in search of ways to enhance their previous designs. Neodymium magnets are the strongest and lightest magnets commercially available today. The JP6NEO.FR is furnished with high strength neodymium midrange speakers, the PRO-FR6NEO, for an expansive covering of the midrange frequencies. Protected by a high-strength aluminum basket, these speakers are sure to outlast your vehicle. The speakers included with the JP6NEO.FR offer extreme volumes at a lower power requirement than other mid-range loudspeakers. They also come equipped with a Silver Bullet Phase Plug that helps efficiency throughout. These neodymium powerhouses are sure to give crisp clear highs with a power rating of 225 watts RMS and 450 watts MAX power @ 4 Ohms. This pair of easy to install enclosures come with everything you need to get amazing sound out of your front stage! Plug this enclosure directly into your existing wiring harness, connect directly to your factory amplifier, or add an external amplifier for extreme power and maximum loudness immediately! Highlights Plug and Play capabilities for instant installation Especially designed for Jeep JL, JLU, and JT plug and play installation. The units use the factory amplifier but alternatively can be powered for even more volume with an external amplifier. 6.5” DS18 Pro-FR6NEO Pro Audio Mid-Range Loudspeaker included for the loudest sound and highest wattage to decibel efficiency 225 watts RMS 450 watts MAX @ 4 Ohms. (pair) Silver Bullet Resonator (tweeter) that offers the higher range of your NEO bringing you a fuller range of frequencies to blast. Great For Jeep Audio Technical Details Download JP6NEO.FR Product Manual General Specifications Nominal Speaker Diameter 6.5″ / 165mm Nominal Impedance 4 Ohms RMS Power Handling 225W MAX Power Handling 450W Sensitivity (1w/1m) 97dB Frequency Response 100Hz-16KHz Recommended HI Pass Crossover 160Hz Sold in Pair or Single Pair (Left & Right) Body / Features Enclosure Material ABS Injected Plastic Wiring / Connections OEM Plug Connector Clamps ABS Factory Location Finish Satin Black Woofer Specifications Voice Coil Diameter 1.5″ / 38.6mm Voice Coil Former Material Kapton Winding Material CCAW Cone Material Non-Pressed Paper Dust Cap Material N/A Bullet Material / Color Silver Aluminum Surround Material Cloth Basket Material Aluminum Magnet Material Neodymium Magnet Size / Weight 90x6mm / 7.67 Oz Thiele & Small Parameters Equivalent Volume Vas 2.11L / 0.074ft3 Excursion (one way) Xmax 6.8mm Free Air Resonance Fs 166Hz Mechanical Factor Qms 3.173 Electrical Factor Qes 0.409 Total Factor Qts 0.362 Mechanical Mass Mms 11.31g Mechanical Compliance Cms 0.08mm/H BL Factor BL 9.79 Voice Coil Inductance Le 0.472mH Cone Area Sd 136.85cm2 DC Resistance Re 3.3 ohm Mechanical Mass w/o air Mmd / Enclosure Measurement Overall Length (Left) 7.5″ / 190mm Overall Depth (Left) 7.38″ / 187mm Overall Height (Left) 10.47″ / 265mm Overall Length (Right) 8.18″ / 207mm Overall Depth (Right) 8.14″ / 206mm Overall Height (Right) 9.96″ / 252mm